TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 690 of 836
TM 9-2320-365-10 3-10. M1081 AIR DROP PREPARATION (CONT) e. Slide Assembly Installation. NOTE Steps (1) through (11) require the aid of an assistant. (1) Remove wing nut (1) and retaining bar (2) from cover plate assembly (3). (2) Remove cover plate assembly (3) from slide assembly receptacle (4). (3) Assemble retaining bar (2) and wing nut (1) on threaded rod of cover plate assembly (3). Stow in tool box. (4) Remove safety pin (5) from large pin (6) of slide assembly (7). (5) Remove safety pin (8) from small pin (9) of slide assembly (7). (6) Remove small pin (9) from slide assembly (7). (7) Remove large pin (6) while holding slide assembly (7). (8) Align small hole of slide assembly (7) with middle hole of slide assembly receptacle (4). (9) Install small pin (9) in slide assembly (7) and slide assembly receptacle (4). (10) Install large pin (6) in slide assembly (7) and slide assembly receptacle (4). (11) Install two safety pins (5 and 8) in pins (6 and 9). 3-124 Change 1