TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download

Page 640 of 836

TM 9-2320-365-10 3-82 Change 2 3-5. CHANGING TIRE (CONT) (9) Install CTIS hose (3) on hollow wheel stud (4) with two washers (11) and banjo bolt (12). (10) Position rim cover (14) on wheel (15) with four washers (16) and bolts (17). (11) Notify Unit Maintenance to torque four rim cover bolts to 71-95 lb-ft (96-128 Nm). d. Tire Stowage. (1) Install bolt (1), two washers (2) and nut (3) in CTIS hose (4). CAUTION WARNING Do not over tighten banjo bolt when installing CTIS hose on hollow wheel stud. Failure to comply may result in damage to equipment. Handle tire with care. Tire may have exposed broken metal cords or sharp debris in it. Failure to comply may result in injury to personnel. Tire weighs approximately 350 lbs (159 kgs). Use extreme care when handling tire. Failure to comply may result in injury to personnel. NOTE Slotted hole in rim cover is aligned with pressure valve extension.