TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 635 of 836
TM 9-2320-365-10 Change 2 3-77 (4) Position hydraulic jack (1) under inside bolt head on shock mount (6). (5) Unscrew jack ram (5) until it touches shock mount (6). (5.1) Remove four bolts (6.1), washers (6.2), and rim cover (6.3) from wheel (6.4). (6) Remove banjo bolt (7), two washers (8), and CTIS hose (9) from hollow wheel stud (10). NOTE Perform steps (4) and (5) when removing rear tire. NOTE • Both front and rear tires are removed the same way. Rear tire shown. • Air will not escape when CTIS hose is removed from hollow wheel stud. NOTE Perform the following step on vehicles equipped with rim covers.