TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 618 of 836
TM 9-2320-365-10 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION s. STEERING HYDRAULIC SYSTEM s1. STEERING HARD OR DOES NOT OPERATE. Step 1. Raise cab (para 2-22a). CAUTION Do not overfill power steering reservoir. Failure to comply may result in damage to equipment. Step 2. Check that steering reservoir is filled to proper level. Oil should be level with full mark on dipstick. (a) Add oil as required. (b) If oil is over full mark, notify Unit Maintenance. Step 3. Check hydraulic lines and fittings for Class III leaks. (a) If Class III leaks are found or steering is still hard or does not operate, notify Unit Maintenance. (b) Lower cab (para 2-22b). t. AIR TRANSPORT SYSTEM t1. CAB TILT, SPARE TIRE RETAINER, AND SUSPENSION COMPRESSION DO NOT OPERATE. Check hydraulic hoses, air lines, and fittings for Class III leaks. If Class III leaks are found or cab tilt, spare tire retainer, and suspension compression still do not operate, notify Unit Maintenance. t2. SUSPENSION DOES NOT COMPRESS OR RETURN TO NORMAL PROPERLY. Step 1. Check to see if cab raises (para 2-22a). If cab does not raise, perform Air System Troubleshooting (t1. Cab Tilt, Spare Tire Retainer and Suspension Compression Do Not Work). 3-70.10 Change 1