TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 612 of 836
TM 9-2320-365-10 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION k. WHEEL k1. TIRES WEAR UNEVENLY OR EXCESSIVELY. Check tire pressures with tire gage for each CTIS setting. (a) Notify Unit Maintenance if tire pressures do not match those given below: ALL MODELS HWY Mode 55 psi (379 kPa) X-C Mode 33 psi (228 kPa) SAND Mode 20 psi (138 kPa) EMER Mode 14 psi (97 Kpa) (b) If tires still wear unevenly or excessively, notify Unit Maintenance. k2. WHEEL WOBBLES OR SHIMMIES. Step 1. Check wheel studs and lugnuts for obvious looseness. WARNING Notify Unit Maintenance that lugnuts need to be tightened to 415-475 lb-ft (563-644 N·m) as soon as possible. Wheel may come loose if lugnuts are not tightened to proper torque. Failure to comply may result in serious injury or death to personnel. If loose, tighten. Step 2. Check for bent or broken studs and missing or loose lugnuts. (a) Notify Unit Maintenance if two or more lugnuts or studs on the same wheel are missing, broken, or bent. (b) If wheel still wobbles or shimmies, notify Unit Maintenance. 3-70.4 Change 1