TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 499 of 836
TM 9-2320-365-10 (5) Remove two safety pins (4) from compression cylinder (5). (6) Perform steps (3) through (5) on left side of vehicle. (7) Turn SUSPENSION knob (6) to the RAISE position. (8) Turn FUNCTION SELECT knob (7) to the TRUCK SUSPENSION position. NOTE Use back-up hydraulic pump (para 2-41) if pressing PUMP knob does not accomplish step (9). (9) Press and hold PUMP knob (8) until suspension compression plate (3) can be installed on axle stud (9). WARNING Both suspension compression plates must be installed on axle studs. Failure to comply may result in serious injury or death to personnel. NOTE Left and right side suspension compression plates are installed on axle studs the same way. Right side shown. (10) Install suspension compression plate (3) on axle stud (9). (11) Install pin (1) in axle stud (9). (12) Perform steps (10) and (11) on left side of vehicle. 2-365