TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 455 of 836
TM 9-2320-365-10 Change 2 2-320.1/(2-320.2 Blank) b.Preparation of Disabled Vehicle (M1078 Series). • Both drive shafts must be removed when flat towing an M1078 series vehicle over 100 miles (161km) or if towing speed is over 35 MPH. Failure to comply may result in damage to equipment. • Front drive shaft must be removed prior to performing a rear connection lift and tow Failure to comply may result in damage to equipment. • Rear drive shaft must be removed prior to performing a front connection lift and tow. Failure to comply may result in damage to equipment. NOTE Disabled vehicles must be prepared and moved in accordance with FM 20-22 and FM 21-305. (1) Notify Unit Maintenance to remove drive shaft(s) as required. (1.1) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2). (2) Push in SYSTEM PARK control (3). (3) Position hazard lights switch (4) to on. CAUTION