TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 235 of 836
TM 9-2320-365-10 NOTE Vehicles with the following serial numbers are not equipped with Lamp Test Switch: 0002 through 0017, 0019 through 0025, 0027 through 0031, 0033 through 0038, 0040 and 0041, 0043 through 0053, 0055 through 0089, 0091 through 0254, 0256 through 0258, 0260 and 0261, 0263 through 2400, and 2402 through 3091. (3) Press LAMP TEST switch (3) to verify that high engine temperature (4) and TRANS OIL TEMP (5) indicators illuminate. (4) Press down accelerator pedal (6) fully, then release it. (5) Press down and hold accelerator pedal (6) at approximately 1/3 of travel. CAUTION Do not engage starter pushbutton for more than 30 seconds. If engine fails to start within this period, release starter pushbutton and wait two minutes before attempting to start engine again. Failure to comply may result in damage to equipment. (6) Press and hold starter pushbutton (7). 2-135