TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 124 of 836
TM 9-2320-365-10 2-36 Change 2 Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: WARNING • Extreme care should be taken when removing coolant fill cap if temperature gage reads above 180 F (82 C). Contact with steam or hot coolant under pressure may result in injury to personnel. • Pressure in radiator overflow tank must be released before removing cap. Failure to comply may result in injury to personnel. • Do not operate vehicle if radiator cap is damaged or missing. Failure to comply will result in injury or damage to equipment. 3 Before Coolant a. Check coolant level. Coolant level should be between upper sight- glass and lower sight- glass on radiator overflow tank with engine not running. Add coolant as required (Appendix F, Note 4). a. Coolant level below lower sightglass.