TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download

PE PF PG KD KF KB MO MF MH MD AO AF AH AD B-2 Support equipment procured and stocked for initial issue or outfitting to specified main- tenance repair activities. Support equipment which will not be stocked but which will be centrally procured on demand. Item procured and stocked to pro- vide for sustained support for the life of the equipment. It is applied to an item pecu- liar to the equipment which, because of probable discontin- uance or shutdown of produc- tion facilities, would prove uneconomical to reproduce at a later time. An item of a depot overhaul/re- pair kit and not purchased separately. Depot kit defined as a kit that provides items required at the time of over- haul or repair. An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit that provides an item that can be replaced at organi- zational or intermediate levels of maintenance. Item included in both a depot overhaul/repair kit and a maintenance kit. Item to be manufactured or fab- ricated at organizational level . Item to be manufactured or fab- ricated at the direct support maintenance level. Item to be manufactured or fab- ricated at the general support maintenance level. Item to be manufactured or fab- ricated at the depot main- tenance level. Item to be assembled at organi- zational level. Item to be assembled at direct support maintenance level. Item to be assembled at general support maintenance level. Item to be assembled at depot maintenance level. XA XB xc XD Item is not procured or stocked because the requirements for the item will result in the replacement of the next higher assembly. Item is not procured or stocked. If not available through salvage, requisition. Installation drawing, diagram, instruction sheet, field ser- vice drawing, that is identi- fied by manufacturer’s part number. A support item that is not stocked. When required, item will be procured through normal supply channels. NOTE Cannibalization or salvage may be used as a source of supply for any items coded above except those coded XA. (2) Maintenance Code. Main- tenance codes are assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uni- form SMR Code format as follows: (a) The maintenance code en- tered in the third position will indi- cate the lowest maintenance level auth- orized to remove, replace, and use the support item. The maintenance code entered in the third position will indi- cate one of the following levels of maintenance: Code Application/Explanation C Crew or operator maintenance performed within organizational maintenance. O Support item is removed, re- placed, used at the organi- zational level. TM 9-2990-206-34&P