TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 57 of 85
TM 9-2990-206-34&P ASSEMBLY—Continued. INSTALL DUST DETECTOR COVER, PACKING WITH RETAINER, CHAIN FASTENER, CHAIN “S” HOOK, AND CHAIN TOOLS: ./2 inch, 1/2 inch drive socket 1/2 inch drive, O to 300 pound-inches torque wrench NOTE This procedure applies to “clean air” turbosupercharger only. INSTALLATION: 1. Position dust detector cover (A) on compressor housing (B). Ensure mounting holes are properly alined. 2. Install new packing with retainer (C) on cap screw (D). 3. Install assembled chain fastener (E), “S” hook (F), and chain (G) on cap screw and flat washer (H). 4. Secure dust detector cover to compressor housing with attaching hardware. 5. Using 1/2 inch socket and torque wrench, torque tighten cap screws to 120 pound-inches (13.6 N.m). NOTE Ensure the longer cap screw (I) is installed in the position shown. 3-30 Change 1