TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 50 of 85
TM 9-2990-206-34&P ASSEMBLY—Continued. 7. Aline alinement marks and install compressor housingt (H) on backplate (E). Aline alinement marks and posi- tion clamp (D) backplate and compressor housing flanges. If your turbosupercharger is a newer model, alinement marks will be cast into the flanges of the compressor and center housings, and the marks you noted during disassembly should be matched. See page 3-3. NOTE If you cannot locate the alinement marks, or if you are otherwise unsure of the index- ing of the housings, consult Table 3-1. 8. Install and tighten nut (J) to 60 pound-inches (6.75 N.m) using 7/16 inch deep socket and torque wrench. NOTE Tap clamp (0) lightly while tightening nut (J) to seat clamp on flanges. TA293551 Change 1 3-25