TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 49 of 85
ASSEMBLY-Continued. INSTALL CENTER HOUSING, HEAT SHIELD, AND COMPRESSOR HOUSING - CONTINUED 3. 4. 5. 6. Aline alinement marks scribed during disassembly and install heat shield (c)o NOTE If the turbosupercharger is to be used on engine models AVDS-1790-2DR the heat shield is not used. Apply a light coat of corrosion inhib- iting, heat cured, solid film lubri- cant (MIL-L-4601O) on bolts. Secure center housing (B) and heat shield (C) to turbine housing (A) with eight lockwashers and bolts. Torque bolts to 275 pound-inches (31 N.m) using 9/16 inch socket and torque wrench. Place clamp (0) over backplate (E) and on heat shield (F). Install “O” ring (G) on backplate (E). 3-24 Change 1 TM 9-2990-206-34&P