TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 43 of 85
3-7. GENERAL. Section IV. ASSEMBLY before assembly, coat all parts with a light film of engine oil (OE/HDO). Turbosuperchargers are precision products and extreme care and cleanliness must be exercised in all phases of assembly oper- 3-8. PARTS KIT. ations to insure satisfactory performance. Dirt and dust are abrasive. After clean- Parts Kit, Part No. 409448 (page B-9), ing, inspection, and repair, and just must be requisitioned and used to assemble the turbosupercharger. 3-9 ASSEMBLY. INSTALL RETAINING RING. TOOLS: Internal retaining ring pliers NOTE Retaining rings furnished in the Parts Kit have one flat side and one rounded side. Be certain the retaining rings are installed as instructed. INSTALLATION: 1. Place center housing (A) on workbench with large flange (B) up. 2. Using internal retaining ring pliers (C), install retaining ring (D) in second ring groove with flat side of retaining ring down . TA097824 3-18 TM 9-2990-206-34&P