TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 42 of 85
REPAIR—Continued. REPAIR TURBINE HOUSING TOOLS : Hand file 1/4 to 3/4 inch diameter, 1/2 inch drive, stud remover and setter 1. Smooth small nicks or raised metal using a fine hand file. 2. Remove and discard loose or damaged stud(s) (A) using stud remover and setter. 3. Using stud remover and setter, install coarse thread end of new stud, Part No. 400602-1, to a setting height of 1.00 inch (25.4 inn). 4. Repair damaged threads using a used 3/8-16NC thread tap. REPAIR CENTER HOUSING TOOLS : Hand file 1. Smooth small nicks or raised metal using a fine hand file. 2. Repair damaged oil inlet opening threads (B) using a used 1/4 NPT thread tap. 3. Repair damaged mounting leg attaching threads (C), backplate attaching threads (D), and oil drain tube attaching threads (E), using a used 3/8-16NC thread tap. REPAIR CLAMP, COMPRESSOR WHEEL AND NUT, THRUST SPACER, THRUST RING, AND TURBINE WHEEL 1. No repairs are authorized for these parts. 2. Replace damaged components. TM 9-2990-206-34&P 3-17 TA097823