TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 34 of 85
INSPECTION-Continued. INSPECT CLAMP 1. Inspect clamp (A) for cracks or separated welds (B). 2. Inspect nut (C) and yoke stud (D) for thread damage, 3. Replace cracked or damaged clamp or nut. INSPECT MOUNTING LEGS AND OIL DRAIN TUBE 1. Inspect mounting legs (E) and oil drain tube (F) for cracks. Look for bent or crushed drain tube (F). 2. Inspect weld at tube and flange joint. 3. Replace cracked mounting legs. Replace cracked, bent, or crushed oil drain tube. INSPECT HEAT SHIELD 1. Inspect heat shield (G) for cracks and deformation. Tag deformed heat shield for possible repair. 2. Replace cracked heat shield INSPECT TURBINE HOUSING 1. 2. 3. 4. Inspect turbine housing for distorted or warped (K), and (L). Inspect for evidence of with the turbine wheel. (H) for cracks. Look mounting flanges (J), contact or interference (M) Inspect for missing, broken, loose, or damaged studs (N). Tag loose or damaged studs for repair. Inspect tapped holes (P) for thread damage. Replace turbine housing if cracked, or if mounting flanges are distorted. TM 9-2990-206-34&P TA097817 3-11