TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 32 of 85
DISASSEMBLY—Continued. REMOVE PREFORMED PACKINGS, FILTER RETAINING STRAP I AND FILTER FROM DUST DETECTOR COVER NOTE This procedure applies to “clean air” turbosuper- charger only. REMOVAL: 1. Remove filter retaining strap (A) and filter (6). 2. Remove and discard three preformed packings (C) from underside of dust detector cover. REMOVE COMPRESSOR COVER INLET AND OUTLET ADAPTERS AND PREFORMED PACKINGS TOOLS: 9/16 inch offset box wrench 5/8 inch offset box wrench REMOVAL: 1. Using 5/8 inch box wrench, remove compressor cover inlet adapter (A). 2. Using 9/16 inch box wrench, remove compressor cover outlet adapter (B). 3. Remove and discard two preformed packings (C). TA293544 Change 1 3-10.1 TM 9-2990-206-34&P