TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 28 of 85
DISASSEMBLY—Continued. REMOVE SEAL RING, BACKPLATE, AND THRUST SPACER TOOLS: 9/16 inch, double offset box wrench Plastic insert hammer REMOVAL: 1. Using fingers, from groove in remove and discard seal ring (A) turbine wheel shaft (B). 2. Using 9/16 inch box wrench, remove four bolts and flat washers (C) from center housing. 3. Tap the backplate hammer and remove (E). (D) with a plastic insert it from the center housing 4. Remove thrust spacer (F) from backplate (D). 5. Us;ing fingers, remove and discard two spacer rings (G) from thrust spacer (F). TA097813 3-7 TM 9-2990-206-34&P