TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download
Page 24 of 85
TM 9-2990-206-34&P DISASSEMBLY-Continued. REMOVE COMPRESSOR HOUSING TOOLS: Scriber 7/16 inch, 1/2 inch drive, deep socket Socket wrench handle (speeder) REMOVAL: 1. Using scriber, scribe alinement marks on compressor housing (A), clamp (B), and backplate (C). If your tur- bosupercharger is a newer model, alinement marks will be cast into the flanges of the compressor and bearing housings. Take careful note of the alinement marks to ensure proper housing alinement during assembly. 2. Using 7/16 inch socket and speeder, loosen nut (D) and move clamp (B) toward center housing (E). Lift compressor housing carefully to prevent damage to compressor wheel. 3. Remove compressor housing (A). 4. Remove and discard preformed packing (“0” ring) (F). 5. Remove clamp (B). TA293542 Change 1 3-3 CAUTION