TM-9-2990-206-34&P Parts Manual, Tools and Maintenance for Turbocharger Model T18C01 Download

Page 22 of 85

CHAPTER 3 MAINTENANCE OPERATIONS Section I. GENERAL 3-1. PURPOSE. pair, and reassembly of the turbosuper- charger. The step-by-step procedures This chapter provides instructions for are accompanied by Illustrations which disassembly, cleaning, inspection, re- are keyed to the instructions. Section Il. DISASSEMBLY 3-2. REPAIR EQUIPMENT. Listed below are the shop equipment, common tools, expendable materials, and repair parts required for repair of the turbosupercharger. a. Shop Equipment. (1) Arbor press and support plates (2) Vise, 6-inch (3) Workbench b. (common Tools. Box wrench, angular offset, 13/16 inch opening, 12 point (2) Box wrench, double offset, 9/16 inch opening, 6 or 12 point (3) Dial indicator (4) Extension, 5-inch, 1/2 inch square drive (5) Hammer (plastic insert) (6) Hand file (7) Handle, socket wrench (speeder), 16 inches long (8) Holding fixture (improvi seal) (9) Internal retaining ring pliers, 7 inches long (10) Micrometer, 0.00 to 1.00 inch (11) Micrometer, 1.00 to 2.00 inch (12) Ratchet handle, 9-1/2 inches long, 1/2 inch square drive (13) Scriber (14) Socket, 7/16 inch opening (deep), 1/2 inch square drive, 6 or 12 point (15) Socket, 1/2 inch opening, 1/2 inch square drive, 6 or 12 point (16) Socket, 9/16 inch opening, 1/2 inch square drive, 6 or 12 point (17) Stud remover and setter, 1/2 inch drive, 1/4 to 3/4 inch diameter (18) Telescope gage, 0.3125. to 0.5000 inch (19) Telescope gage, 0.5000 to 0.7500 inch (20) Telescope gage, 0.7500 to 1.2500 inch (21) Thickness gage (feeler), 0.0015 to 0.025 inch blades (22) Torque wrench, O to 300 pound- inches, 1/2 inch square drive (23) Vernier calipers c. Expendable Materials. (1) Drycleaning solvent (P-D-680, Type II) (2) Corrosion inhibiting, heat- cured, solid film lubricant (MIL-L-4601O) (3) Preservative general purpose lubrication oil (VV-L-800) (4) Lint-free cloths 3-1 TM 9-2990-206-34&P d. Repair Parts. Requisition Parts Kit, Part No. 409448 (page B-9).