TM-9-2990-205-34&P Parts Manual, Tools and Maintenance for Turbocharger Model 5HDR Download
Page 86 of 128
TM 9--2990--205--34&P 0015 00--2 Source Code Application/Explanation KD KF KB Items with these codes are not to be requested/requisitioned individually. They are part of a kit which is authorized to the maintenance level indicated in the 3rd position of the SMR code. The complete kit must be requisitioned and applied. MO--Made at unit/AVUM level MF--Made at DS/AVIM level MH--Made at GS level ML--Made at SRA MD--Made at depot Items with these codes are not to be requisitioned/requested individually. They must be made from bulk material which is identified by the P/N in the DESCRIPTION AND USABLE ON CODE (UOC) column and listed in the bulk material group work package of the RPSTL. If the item is authorized to you by the 3rd position code of the SMR code, but the source code indicates it is made at higher level, order the item from the higher level of maintenance. AO--Assembled by unit/AVUM level AF--Assembled by DS/AVIM level AH--Assembled by GS level AL--Assembled by SRA AD--Assembled by depot Items with these codes are not to be requested/requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the 3rd position of the SMR code authorizes you to replace the item, but the source code indicates the item is assembled at a higher level, order the item from the higher level of maintenance. XA Do not requisition an “XA” coded item. Order the next higher assembly. (Refer to NOTE below.) XB If an item is not available from salvage, order it using the CAGEC and P/N. XC Installation drawings, diagrams, instruction sheets, field service drawings; identified by manufacturer’s P/N. XD Item is not stocked. Order an XD--coded item through normal supply channels using the CAGEC and P/N given, if no NSN is available. NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes except for those items source coded “XA” or those aircraft support items restricted by requirements of AR 750--1. Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use the repair support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows: Third Position. The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to the following levels of maintenance: WP 0015 00