Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2990-205-34&P Parts Manual, Tools and Maintenance for Turbocharger Model 5HDR Download

Page 74 of 128

TM 9--2990--205--34&P 0012 00--12 ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED 0012 00 j. Install new preformed packing (13) on bearing housing. k. Install clamp (14) and slide it down on bearing housing. l. Install compressor cover (15). Align marks (16) scribed in housing flanges during disassembly. If your turbo is a new/newer model, alignment marks will be cast into the flanges of the compressor cover and housing, and the marks you noted during disassembly should be matched. NOTE If you cannot locate the alignment marks, or if you are otherwise unsure of the indexing of the housings for your turbo, consult Table 3--1. m. Place clamp (17) over compressor cover and bearing housing flanges, and install clamp nut (18). n. Torque clamp nut to 110 to 130 lb--in (12.43 to 14.69 NSm). 03i499m 17 15 18 16 13 14