Sign up to sell your inventory with NSN Lookup

TM-9-2990-205-34&P Parts Manual, Tools and Maintenance for Turbocharger Model 5HDR Download

Page 69 of 128

TM 9--2990--205--34&P 0012 00--7 ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED 0012 00 6. Installation of Flinger Sleeve Insert, Retaining Ring, Compressor Wheel Shims, and Compressor Wheel . CAUTION Use steady pressure but do not force flinger sleeve insert into bearing housing; metal seal rings or flinger sleeve may fracture. a. Center metal seal rings (1) on flinger sleeve (2) with gaps in rings 90 degrees apart. b. Install flinger sleeve insert (3) in bearing housing below retaining ring groove. The arrow (4) stamped on the top of the insert should be in line with the oil inlet port of the bearing housing. c. Install retaining ring (5). d. Install compressor wheel shims (6). 03i493m 3 1 2 4 45 45 o o 6 5 e. Place a 1--1/8 inch angular 12 point box wrench (7) in a vise. Position wrench to hold turbine wheel hub. 03i494m 7