TM-9-2990-205-34&P Parts Manual, Tools and Maintenance for Turbocharger Model 5HDR Download
Page 65 of 128
TM 9--2990--205--34&P 0012 00--3 ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED 0012 00 2. Installation of Thrust Washer Bearing, Lower Sleeve Bearing, Retaining Rings, and Upper Sleeve Bearing . a. Place bearing housing (1) on work bench with larger flange up. NOTE If the third (bottom) retaining ring was removed from the bore of bearing housing during disassembly, it must be installed using retaining ring pliers before the following steps can be performed. b. Install new thrust washer bearing (2) and new lower sleeve bearing (3). CAUTION Use care when installing retaining rings that they do not scratch the bore of the bearing hous- ing. NOTE Retaining rings have one rounded side and one flat side. Install retaining rings with rounded sides toward sleeve bearings. c. Using retaining ring pliers, install two retaining rings (4) in grooves in bearing housing bore. 03i506m 4 RETAINING RING PLIERS 2 3 1