TM-9-2990-205-34&P Parts Manual, Tools and Maintenance for Turbocharger Model 5HDR Download
Page 33 of 128
TM 9--2990--205--34&P 0006 00--1 GENERAL MAINTENANCE INSTRUCTIONS 0006 00 THIS WORK PACKAGE COVERS: General Maintenance Instructions PURPOSE This chapter contains instructions for cleaning before disassembly; disassembly; cleaning, inspection, and repair of component parts; assembly; operational testing; and storage of turbosuperchargers after they have been removed from the engine. APPLICATION Procedures in this chapter, except those involving components of the dust detector system, apply to all turbo configurations covered by this manual. Maintenance operations for dust detector components apply to the “clean air” turbos (part numbers 187727, 655595--3, and 655595--4) only. ORGANIZATION Each maintenance work task described in this work package will be organized in the following manner: a. This Work Package Covers . Provides a description of the scope of the work package. b. Initial Setup . lists the information you will need before starting the procedure, such as: 1) Tool requirements. 2) Material and supplies requirements. 3) Personnel requirements. 4) Equipment condition. c. Procedure . Outlines the process for performing the task in step--by--step sequence. ILLUSTRATIONS Each illustration, used to describe a procedural step, will be located following that step(s). Illustrations in WP 0007 00 are derived from a “clean air” turbo assembled for typical left hand mounting. CONVERSIONS At the time of publication of this manual, a program is underway for converting all standard Model 5HDR Turbo- superchargers to the “clean air” configuration. Instructions for performing this conversion are contained in Mainte- nance Work Order (MWO) 9--2815--220--50--1. END OF WORK PACKAGE 0006 00--1/2 blank