TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 93 of 532
TM 9-2615-220-34 TA126195 I Generator coupling tool 2 Generator drive adapter 3 "V" band clamp Figure 2·15.1. 01ecki11g generator d11e gear slip torque 011d rotational de/lect/011. Fi&)•re 2·16. Removi+g or i+stnlli+g generntor adapter. (g) Remove six self-locking bolts (fig. 2-16) and remove generator adapter. Remove and discard mounting gasket. The adapter (fig. 2-16) must be retained r installation with replacement generator. ( Remove self-locking nut and nae washer located al nine o'clock position and five bolts and lockwashers (fig. 2-17) and remove generator drive adapter with drive gear shaft and bearing as an assembly. Remove and dfacard gasket. (2) /11s1a/latiu11. (a) Using a new generator drive adapter gaskt:l, install generator drive adapter (fig. 2-17) with drive gearshart and bearing as a unit. Secure generator drive adapter assembly to crankcase assembly with live bolts and lockwashers and one self-locking nut and nat washer on stud behind adapter. ( ). Install new mounting gasket (lig. 2-16) on generator allapter. Install adapter and secure with six self-locking bolts. (c) Install oil inlet elbow (3, fig. 2-15) and Change 3 2·36.1 (2·36.2 blank)