TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 331 of 532
) TM 9-2815-220-34 MODEL AVDS-1790-2DR 10 TA055610 Figm·e 3·210. Crankshaft dC1mper and oil filter housing studs. Table 3-19. Crankshl. Damper a11d Oil Filter flousi119 Standard Stud lde11ti)icatio11 Fig. Ref. Setting No. No. No. height req'd Stud size and length 3-210 1 1-114 2 3/8-16(15116)x ?8-24(13116) x l· 15/l 3-210 2 25132 2 5116-18(11/16)x5116-24(9116 x1-5116 3-210 3 1-7/16 2 3/8-16 (15/16) x3/8-24(1?16) x 2-3132 3-210 4 1-3132 2 3/8-16 (27132) x 318-24(718) x 1-3/4 3-210 5 1-13132 10 318-16 (15116) x3/8-24(13116)x2-3-2 3-210 6 27/32 2 5+6-18(31•1) x316-24(19132)x1-112 3-210 7 l-3116 2 8-16 (7/8) x318-24 (15/16)x 1-314 3-210 8 1-1/16 6 3/8-16(718) x ?8-24(15/16)x1-314 3-210 9 13116 I 3/8-16 (314) x24 (9/16)x 1-13132 3-210 10 15116 4 318-16(1?16) x 3/8-24 (11/16) x 1-38 3-210 11 7/8 4 5116-18(3/4) x5116-24 (19-2)x 1-112 3-210 12 1·1116 2 3/8-17/8)x318-24 (27132) x 1-3/4 3-210 13 4-1/16 2 3/8-16 (1?16)x318-24 (15/16)x4-11116 3-89. Assembly a. Install lifting eye gasket (3, fig. 3-207), two lifting eyes (2), spacer (1.1, model AVDS-1790-2DR engine), and secure with four self-locking nuts (1). Install oil temperature transmitter (15) and oil temperature warning switch elbow (16) and switch (17). Install bushing (7.1, model A VDS-1790-2DR engine) and oil temperature transmitter (15). In- stall oil cooler vent tube adapter (5). Install new preformed packings (11) and (12). l nstall pipe plugs (4, 6, 7 and 8). Install four new oil cooler hose adapt- er gaskets (13) and adapters (14). Install oil tem- perature gage transmitter reducer bushing (9) and transmitter (10). Change 3 3-121