TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 257 of 532
TM 9-2815-220·34 f. Rot.ate crankshaft as necessary to obtain proper position of crankshaft counterweights for removal. Figure 3·131. Crank.shaſt tui1/1 main bearing capJ remove1l J/tvtciflg correct pwition ofcra11loloa/1 r11111enceisl1u before remonll or ofter ins1ollatio11 of cro11of1. NOTE The crankshaft and connecting rod sling Part No. 10X2958 consists of a cable and two adapters. The adapter with the dowel pin hole attaches to the crankshaft flywheel flange. The other adapter at- tache to the torsional vibrat. ion damper mounting flange. g. Install the sling adapter (fig. 3-132) on flywheel flange dowel pin and secure the adapter to flange with two flywheel mounting bolts. Ir. Install the sling adapter (fig. 3-133) to torsional vibration damper flange crankshaft and secure with two vibration damper mounting bolts. I I figure 3·132. /11.ialling or removing crankshaft ond ro1111er1i11 r 1/ing or cronlo/1oſt fl)1tJheel flange. 3-55