TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 246 of 532
TM 9-2815-220-34 f'ig11re -105. Rcmovi11y µisto11 pi11 11111/ pislo11 - cylimfor No. IR. pump. This capscrew cannot be removed until I.he oil pump is disassembled. c. Remove six capscrews and lockwashers (g. 3- L09) an· d remove oil pan pressure compartment barne. 3-30. Fuel Pump Drive Coupling Adapter and Crankshaft Torsional Vibration Damper. a. Cut locking wire and remove six bolts (lig. 3-1 10) attaching fuel pump drive coupling adapter and crankshaft torsional vibration damper to crankshaft and remove adapter and fuel pump drive coupling. .I. Cut locking wire and remove six machine I bolts (fig. 3-110.1) attaching the power take-off spur gearshaft and crankshaft. t.orsional vibration damper to crankshaft and remove gearshaft. b. Install three mechanical pullers Part No. 5739997 (tig. 3-111) into puller screw holes provided in crankshaft torsional vibration damper and al- /•'igu 3-106. Engine with cy/i11dcr assemblies ancl pisto11+ remover/ showing crankcase p1·otcctor installed. 3-46 Change 1 ) )