TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 227 of 532
J . - TURBOSUPERCHARGER MOUNTING BASE TRANSMISSION ADAPTER (· Fiy1u·t•J..J. lfr1111wi11y +1· i11stulli119 twos11p1m:haroer 111111111/ i11u mw. r ie rod a lld base s11ppo11. tie rod clamp and tie rod clamp seat. Remove cotter pin, slotted nut and bolt and remove right tmbosupercharger mounting base support from transmission tldnpter. b. Remove left tmbosupcrcharger support in a ma1111er similar to paragraph a. above, except also OIL FILLER TUBE UPPER SUPPORT TM 9-2815-220-34 remove the oil filler lube upper support (fig. 3-53.1 ). 3-21. Throttle Control and Fuel Shut·off Rods, and Throttle Lever a. Remove cotter pin and flat washer (1, fig. 3-54) and remove manual fuel shut-off rod (2). Discon- nect and remove manual fuel shut-off spring (3) from spring bracket (4) and injection pump lever. Remove two capscrews (5) and remove shut-off spring bracket. a.1. Remove cotter pin and flatwasher (J, fig. 3-54.1) and remove manual fuel shut-off rod (2). Dis- connect and remove manual fuel shut-off rod spring (3) from spting bracket (4) and injection pump lever. Remove three capscrews and lockwashers (5) and remove spring bracket from fuel injection pump. b. Remove two self-locking nuts, machine bolts a nd one flat washer (I, fig. 3-55) and remove throt- tle rod (2) from injection pump lever and inter- mediate lever (3). Remove self-locking nut and ma- chine bolt (4) and remove adjustable rod (5) from intermediate lever. Disconnect and remove throt- tle lever retu spring (6) from retu spring \ TURBOSUPERCHARGER MOUNTING BASE TA055591 FigureS-;.J. Oilfillertubeupper suppo, model AVDS-1790-�DR e+gi+e. Change 3 3·31