TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 201 of 532
TM 9-2815-220-34 1 1 Assembled washer boll and self-lking nut 2 Assembled washer boll TA265673 Figure S-9.1. Removi 11g or i11stalli ll t:ooli11g fan /truud, model AVDS-1790·DR e1tgi11e. 1 Self-locking nut 2 Self-locking nut und nat washer 3 Right installation guide 4 Time totalizing meter FUEL SUPPL � TA265674 I 5 Right lifting eye 6 Lefl installation guide 7 Leſt lifting eye 8 Onmper housing 9 Self-locking nul and Oat washer Fig11rc 3-10. Re11wt•i11g e11gi11r i11stallatio11 guitle+ a11d time totalizing mclPI', model AVDS-1790-ZC and A \I S-1790-ZD e11gi11es. I (2) Remove screw and self-locking nul (8) nttaching each m anifold heater fuel lube clamp to oil cooler hose clamp and remove clamps. Discon- nect oil cooler outlet hoses (9) at oil coolers (10) and al damper housing (JI) and remove hoses. Disconnect oil cooler oil inlcl hoses (12) at oH I coolers (10) and al clamper housing (11) and remove boscs. (3) Remove two assembled washer bolts and one nat washer ( 1, fig. 3-12) and remove trans- IJ mission oil cooler screen (2). Remove four machine bolts (3) and remove engine oil cooler screen (4), damper end oil cooler screen bcket (5), center oil cooler screen bracket (6) and engine oil cooler (7) as an assembly from oil cooler support frame. I Electrical lead 2 Cn p sc rew and lockwashcr 3 Self- l ocking nut 4 Ground lead 5 Spocet· 6 ' l'ime totalizing meter Fig11re 3-10.1. Rc11111+i11g time IOl<1lii11g meter, 111odel AVIJS-1790-DR e11gi11e. Change 3 3-6.1 (3·6.2 blank)