TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 170 of 532
TM 9·2815-220-34 / CHINE BOLT LOCKWASHER TA26566 2· I 42. I Remo1•i11g or l11stolli11g 111i11g homess loop clomp. (k. l) Remove one machine bolt and lock- washer (fig. 2-142.1). Remove loop clamp. (/) Remove two capscrews and lockwashers (fig. 2-143) and remove two retaining straps. Remove two capscrews and lock nuts and remove bracket assembly. Remove manifold preheat cable connector. Figure 2·143. Removing or in$tolling wiring ome and generator coble bracket embly. 2·88 Change 3 (m) Remove two capscrews and lkwashers (fig. 2-144) and remove two retaining straps. Remove four capscrews and lockwashers and remove wiring harness, generator cables and mounting bracket. TA265663I gure 2-144. Removing or installing wiring ltorn� 0+d generator cable. (n) Remove two assembled washer bolts (fig. 2- 145) and remove wiring harness and generator cable bracket assembly. Remove starter cable bracket assembly in the same manner. (2) Installation (a} Install generator cable and wiring harness bracket assembly (fig. 2-145) and secure to center oil cooler mounting bracket with two assembled washer bolts. Install the starter cable bracket in the same manner.