TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 166 of 532
TM 9-2815-220-34 Figure 2·135. Reming or iru10/ling starter coble loop omps. (e) Remove six capscrews and lk washers (fi g. 2-136) and remove three retai ning straps. Remove manifold preheat cable connector. Remove two capscrews and lk nuts and remove starter cable bracket assembly. Figure 2·136. Remo11i11g or iru10/li11g starter coble bracket osembly. (f) On early enes remove four capscrews I and lock washers (fig. 2-13 7) and disconnect starter cable mounting bracket. Remove two capscrews and lockwashers and remove retaitting strap. ([1) On late engines, remove two assem- bled washer bolts and loop clamps (fig. 2-136.1) securing smoke generating system electrical lead to left rear upper cover. Remove one assembled \vasher bolt and loop clamp securing lead to side of oil cooler support frame. Remove one self-locking nut (fig. 2-136.2) and remove loop clamp. Dis- connect two electrical connectors from solenoid valves. Remove capscrew and lockwasher securing ground lead to bracket. TA2656581 Figure 2·136. J. Removing or installing smoke generating system electrical lead. 2·86 Change 3