TM-9-2815-220-34 Direct Support Manual for AVDS-1790-2C and AVDS-1790-2D Engines Download
Page 152 of 532
TM 9-2815-220-34 (4) Remove cotter pin and nat washer (fig. (21 7) and remove manual fuel shut-off rod. Discard cotter pin. b. Installation. (1) Install throLtlc operating lever rod (fig. 2-116) and secure to fuel injection pump lever with machine bolt, flat washer and self-locking nut. Se- cure rod to intermediate lever with machine bolt and se lf - locking nut. Install adjustable rod and se· cure with se l f -l oc king nut and machine bolt. Install manual fuel shut-off rod assembly (fig. 2-117) and secure with flat washer and new cotter pin. Install adjustable rod (fig. -115) and secure with setr-locking nut and machine bolt. Install manual fuel shut-off rod and secure with flat washer and new cotter pin. (1.1) Deleted. (2) Check throttle linkage and manual fuel shutoff rod for free movement. Refer to paragraph 2-2lb. (3) Install cooling fans and cooling fan vanes (para 2-21 b ). 2-76 Change 3 Figre2-J 17. Removing or installing mamwlfuel slml·offrod. 2-40.1. Transmission Control Rod, Model AVDS-1790-2DR Engine Deleted Figure 2·117. I. Deleted.