TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 999 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 DISASSEMBLY (Continued) 19. Remove three screws (50), with lock washers (51), and flat washers (52) securing access cover (53) to solenoid housing assembly (12). Discard lock washers. 20. Remove access cover (53) and gasket (54). Discard gasket. 21. Loosen plain nut (55) and remove machine screw (56) from solenoid stop control (57). 22. Remove solenoid stop control (57) from pin (58) in solenoid control housing (44). WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 23. Remove outer retaining ring (59) and flat washer (60) from straight shaft (16). Discard retaining ring. 24. Slide straight shaft (16) through solenoid housing assembly (12) and solenoid control housing (44) until bearing (61) and two retaining rings (62) are exposed. 25. Remove and discard outer retaining ring (62). 26. Remove and discard bearing (61) using a suitable puller (item 85, WP 0176). 58 55 56 57 50 51 52 53 54 62 61 62 12 44 16 60 59 WP 0123 00-5