TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 998 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 DISASSEMBLY (Continued) 11. Remove two throttle control spacers (31) and spring (9) from straight shaft (15). Discard spring. WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 12. Remove retaining ring (33) from straight shaft (16). Discard retaining ring. 13. Remove machine screw (34), plain nut (35), and angle bracket (36) from governor cross shaft control lever assembly (37). 14. Remove governor cross shaft control lever assembly (37), two bearings (38), and two retaining rings (39) as an assembly, using a suitable puller (item 85, WP 0176), from straight shaft (16). 15. Remove two retaining rings (39) and two bearings (38) from governor cross shaft control lever assembly (37). Discard retaining rings and bearings. 16. Remove two machine screws (40) and two lock washers (41) securing electrical solenoid (42) to solenoid housing assembly (12). Discard lock washers. 17. Disengage rigid connecting link (43) from solenoid control housing (44) and remove electrical solenoid (42) with gasket (45). Discard gasket. 18. Remove spring pin (46), rigid connecting link (43), spring retainer (47), spring (48), and spring retainer (49) from electrical solenoid (42). Discard spring pin and spring. 44 32 9 32 36 35 34 46 43 33 38 39 37 39 40 41 47 48 38 16 49 45 12 42 WP 0123 00-4