TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 997 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 DISASSEMBLY WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 1. Place throttle control assembly (13) in a machinist's vise (item 132, WP 0176) and remove retaining ring (15) from straight shaft (16), using snap ring pliers (item 81, WP 0176). Discard retaining ring. 2. Remove bearing (17) using a suitable puller then remove retaining ring (18) from straight shaft (16). Discard retaining ring and bearing. 3. Remove screw (19) and lock washer (20) from throttle lever assembly (8). Discard lock washer. 4. Remove throttle lever assembly (8) and woodruff key (21) from straight shaft (16). Discard woodruff key. 5. Remove retaining ring (22) and flat washer (23) from straight shaft (16). Discard retaining ring. 6. Remove fuel shutoff lever assembly (24) from straight shaft (16). 7. Remove and discard two plain seals (25) from fuel shutoff lever assembly (24). 8. Remove flat washer (26) and retaining ring (27) from straight shaft (16). Discard retaining ring. 9. Remove screw (28) and lock washer (29) from throttle lock control lever assembly (30). Discard lock washer. 10. Remove throttle lock control lever assembly (30) and woodruff key (31) from straight shaft (16). Discard woodruff key. 28 29 24 25 8 19 20 22 23 25 31 16 21 30 27 26 15 17 18 13 WP 0123 00-3