TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 996 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 TEST 1. Disconnect rigid connecting link (1) by removing safety pin (2) and flat washer (3). 2. Disconnect control rod assembly (4) by removing self-locking nut (5) and screw (6). Discard self-locking nut. 3. Connect spring tester (7) (item 117, WP 0176) to throttle lever assembly (8) and test force required to move throttle lever assembly (8). Replace spring (9) if measured force is not 34±4 pounds (15.4±1.8 kg). Note that if repair is necessary, this spring is a mandatory replacement item. 5 6 2 4 3 1 REMOVAL 1. Remove two screws (10) with lock washers (11) securing solenoid housing assembly (12) to damper housing. Discard lock washers. 2. Remove throttle control assembly (13) as a unit by sliding assembly out of pump drive adapter (14). 7 9 8 10 14 13 11 12 WP 0123 00-2