TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 991 of 1563
TM 9-2815-220-24 THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA) 0122 00 ASSEMBLY WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 1. Install new woodruff key (31) (item 103, WP 0175) onto straight shaft (15). 2. Install throttle control lever assembly (30) over woodruff key (31). a. Secure using screw (28) and new lock washer (29) (item 89, WP 0175). 3. Install one washer (44), new spring (9) (item 264, WP 0175), and second washer (44) followed by a new retaining ring (43) (item 8, WP 0175). 4. Assemble governor control lever assembly (37). a. Install two new retaining rings (39) (item 12, WP 0175) then two new bearings (38) (item 309, WP 0175) in lever (42) using a suitable press. b. Install adjusting screw (40) and lock nut (41) onto lever (42). 5. Install governor control lever assembly (37) onto straight shaft (15). 6. Install two new retaining rings (36) (item 8, WP 0175) on straight shaft (15). 7. Install one new retaining ring (33) (item 12, WP 0175), bearing (34), and second new retaining ring (33) into lever (35). 8. Install bracket assembly (11) onto cross shaft assembly (12) and secure with new retaining ring (32) (item8, WP 0175). 33 37 12 33 35 11 34 32 36 4 3 3 3 3 8 9 39 8 4 4 4 4 30 0 1 2 4 9 4 28 29 3 15 1 4 WP 0122 00-9