TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 986 of 1563
TM 9-2815-220-24 THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA) 0122 00 DISASSEMBLY WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 1. Place throttle cross shaft assembly (12) in a machinist's vise and remove retaining ring (14) from straight shaft (15). Discard retaining ring. 2. Remove bearing (16) using a suitable puller then remove retaining ring (17) from straight shaft (15). Discard retaining ring and bearing. 3. Remove screw (18) and lock washer (19) from throttle lever assembly (8). Discard lock washer. 4. Remove throttle lever assembly (8) and woodruff key (20) from straight shaft (15). Discard woodruff key. 5. Remove retaining ring (21) and flat washer (22) from straight shaft (15). Discard retaining ring. 6. Remove manual fuel shutoff lever assembly (23) from straight shaft (15). Plain seals (24) and sleeve bearings (25) will be replaced in "Repair" of this work package. 7. Remove flat washer (26) and retaining ring (27) from straight shaft (15). Discard retaining ring. 12 23 22 21 25 24 25 24 27 26 14 16 15 8 17 18 19 20 WP 0122 00-4