TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 982 of 1563
TM 9-2815-220-24 FUEL/WATER SEPARATOR CONTROL MOUNTING PLATE REPLACEMENT 0121 00 CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace part if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. INSTALLATION 1. Install fuel/ water separator control mounting plate (1). a. Apply a small amount of Lubriplate (item 23, WP 0173) to four bolts (2). b. Position fuel/ water separator control mounting plate (1) onto engine block. c. Install four bolts (2) with new lock washers (3) (item 86, WP 0175), and clamp (4). d. Tighten four bolts (2) to 13 to 15 foot-pounds (18-20 N•m), using torque wrench (item 127, WP 0176). 2 4 3 1 END OF WORK PACKAGE WP 0121 00-2