TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 964 of 1563

TM 9-2815-220-24 COUPLING, FUEL INJECTION PUMP, REPLACE/REPAIR 0116 00 INSTALLATION 1. Install a new woodruff key (7) (item 359, WP 0175) on shaft of fuel injection pump (3). 2. Install assembled sleeve (4) on fuel injection pump (3). 3. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of shaft on fuel injection pump (3). 4. Secure coupling half with new lock washer (2) (item 97, WP 0175) and plain nut (1). 5. Tighten plain nut (1) to 79-87 foot-pounds (107-118 Nm). 6. Insure that O-ring (14) is in groove in face of sleeve (4). Use a light coating of Lubriplate (item 23, WP 0173) to hold O-ring in position. 14 1 2 4 7 3 WP 0116 00-8