TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 957 of 1563
TM 9-2815-220-24 COUPLING, FUEL INJECTION PUMP, REPLACE/REPAIR 0116 00 THIS WORK PACKAGE COVERS: Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Tools: Dial indicator (item 65, WP 0176) General mechanic’s tool kit (item 121, WP 0176) Machinist’s vise (item 132, WP 0176) Torque wrench, 0-175 (item 127, WP 0176) Fabricated Items: Coupling puller (item 6, WP 0177) Mandatory Replacement Parts: Lock washer (2) (item 97, WP 0175) O-ring (1) (item 71, WP 0175) O-ring (2) (item 169, WP 0175) Pipe plug (2) (item 7, WP 0175) Woodruff key (2) (item 359, WP 0175) Expendable Materials: Grease (item 24, WP 0173) Lubriplate (item 23, WP 0173) Personnel Required: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine level on flat surface Fuel injection pump assembly removed (WP 0115) REMOVAL CAUTION Make sure coupling sleeves and hubs are stamped with identification marks to prevent non-mating of parts. The sleeves and hubs are matched for each assembly and must not be interchanged between assemblies. 2 3 NOTE Coupling sleeve must be in a rigid position to remove nut. 1. Remove plain nut (1) and lock washer (2) from fuel injection pump (3). 1 WP 0116 00-1