TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 950 of 1563
TM 9-2815-220-24 FUEL INJECTION PUMP ASSEMBLY REPLACEMENT 0115 00 INSTALLATION (Continued) 6. Apply a small amount of Lubriplate (item 23, WP 0173) to mounting screw (25) and recessed washer (23). NOTE Lower rear bolt (25) cannot be installed after fuel injection pump is in place. 7. Install mounting screw (25) and recessed washer (23) in lower rear hole of fuel injection pump (2). 8. Install sling (26) on fuel injection pump (2) and finger tighten screw (25) as you install pump in position on mounting bracket (28). 9. Apply a small amount of Lubriplate (item 23, WP 0173) to mounting screws (22, 24), and three recessed washers (23). 10. Secure fuel injection pump (2) with four mounting screws (22, 24, 25) with recessed washers (23). 11. Tighten four mounting screws (22, 24, 25) to 50-52 foot-pounds (68-71 N•m), using torque wrench (item 127, WP 0176). 28 2 25 23 (4 places) 22 24 22 26 WP 0115 00-12