TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 935 of 1563
TM 9-2815-220-24 FUEL INJECTION NOZZLE REPLACE/REPAIR 0114 00 ASSEMBLY (Continued) NOTE If you have the spring type retainer (23A) rather than the solid retainer (23), discard the spring type retainer and use the new solid type. Be sure to replace the soft gasket with a hard steel gasket and mark the body top "D1". 5. Install nozzle valve (27) in nozzle body (28). 6. Install nozzle tip (26), spacer (11), seat (25), new spring (24) (item 168, WP 0175), and sleeve (23) in nut (10). 7. While holding nut (10) and associated parts together as an assembly, install nut (10) on nozzle and holder (3). 8. Torque nut (10) to 87-92 foot-pounds (118 -125 N•m), using torque wrench (item 127, WP 0176). . 9. Test nozzle and holder (3) and adjust to achieve proper specifications. Refer to "TEST" in this work package. 23A 11 3 27 26 25 24 10 23 Identification Stamp D1 28 WP 0114 00-15