TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 912 of 1563
TM 9-2815-220-24 FUEL INJECTION TUBES REPLACEMENT 0113 00 INSTALLATION (Continued) 8. Install inner fairlead half (28) between tube assembly and angle bracket (31) (see detail C). CAUTION When bending injection tubes is required, be careful not to nick tubing. The bending tools are designed to allow bending without nicks. 9. Assure that fairlead half (28) is aligned with bracket (31) holes and align tube to fit within 1/8 inch (3.175 mm) in any direction with fairlead half. Use two bending tools (24) (item 13, WP 0177). 10. Install outer fairlead half (28) (see detail C). a. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of two new self-locking screws (32) (item 223, WP 0175). b. Install retainer (30) using two screws (32) to secure to angle bracket (31). c. Tighten two screws (32) to 160-180 inch-pounds (18-20 N•m). 24 31 28 32 30 C C WP 0113 00-8