TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 904 of 1563
TM 9-2815-220-24 POWER TAKEOFF DRIVE SHAFT REPLACE/REPAIR (2DR) 0112 00 REMOVAL 3 4 2 1 1. Remove PTO drive shaft (1). a. Remove lock wire (2) securing six screws (3). b. Remove six screws (3) fastening PTO drive shaft (1) and damper (4) to crankshaft. CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. 3 4 2 1 INSTALLATION 1. Install PTO drive shaft (1). a. Place drive shaft (1) in position. b. Secure with six screws (3). c. Torque-tighten screws (3) to 80-85 foot-pounds (110-116 N•m) using torque wrench (item 127, WP 0176). d. Secure six (3) screws using lock wire (4). END OF WORK PACKAGE WP 0112 00-2