TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 903 of 1563
TM 9-2815-220-24 POWER TAKEOFF DRIVE SHAFT REPLACE/REPAIR (2DR) 0112 00 THIS WORK PACKAGE COVERS: Disassembly, Assembly INITIAL SETUP: Tools and Special Tools: General mechanic’s tool kit (item 121, WP 0176) Torque wrench, 0-175-foot pounds (item 127, WP 0176) Expendable and Durable Items: Locking wire (item 43, WP 0173) Personnel Requirements: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine removed from vehicle and placed on a flat stationary surface PTO/Fuel Pump Drive Housing Removed (WP 0111) NOTE This work package describes how to remove the PTO drive shaft with the damper housing not removed. The cap screws that fasten the PTO drive shaft also secure the damper. The damper will remain in position with these cap screws removed. The procedure is the same whether the damper housing is removed or not - only the equipment conditions change. WP 0112 00-1