TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 897 of 1563
TM 9-2815-220-24 PTO COUPLING/FUEL PUMP DRIVE HOUSING REPAIR (2DR ONLY) 0111 00 ASSEMBLY 1. Install new seal (25) (item 224, WP 0173). a. Apply a bead of silicone sealant (item 33, WP 0173) on wall of casting where seal will be installed. b. Install seal in PTO/fuel pump housing (8) with lip of seal facing inwards (towards engine). 2. Assemble spur gear (21) and drive bevel gear assembly (20) into adapter (16). a. Lubricate spur gear (20) with Lubriplate (item 23, WP 0173) and slide into adapter (16). b. Install bevel gear shaft (20) through spur gear (21). c. Secure with slotted nut (23) using flat washer (24). d. Using dial indicator (item 53, WP 0170), check endplay between spur gear (21) and adapter (16). (1) Endplay must not exceed 0.007 inch. e. Install new cotter pin (22) (item 48, WP 0175). 8 25 22 23 24 21 16 20 WP 0111 00-7