TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 883 of 1563
TM 9-2815-220-24 FUEL SUPPLY PUMP MOUNTING ADAPTER REPAIR/REPLACEMENT 0109 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools: General mechanic’s tool kit (item 121, WP 0176) Mechanical puller (2) (item 90, WP 176) Torque wrench, 0-600 ft-lb (item 128, WP 0176) Mandatory Replacement Parts: Gasket (1) (item 349, WP0175) [ Self locking nuts(8) (item 140, WP 0175) Expendable Materials: Cleaning compound solvent (item 8, WP 0173) Crocus cloth (item 9, WP 0173) Expendable Materials (Continued): Lubriplate (item 23, WP 0173) Sealing compound, silicone sealant (item 30, WP 0173) Personnel Required: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine removed from vehicle and placed on a flat stationary surface Fuel back-flow valve removed (WP 0081) REMOVAL 1. Remove back-flow valve bracket (1). a. Remove two self-locking nuts (2) with flat washers (3). Discard self-locking nuts (3). 5 5 4,6 2,3 1 b. Remove bracket (1). 2. Remove fuel supply pump mounting adapter (4). a. Remove six self-locking nuts (2) with flat washers (3). Discard self-locking nuts. b. Remove adapter using two mechanical pullers (5) (item 90, WP 0176). c. Remove and discard gasket (6). CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. WP 0109 00-1